1. on your A200 open the settings and go to the Developer Options. Enable USB debugging. 2. Download this and then extract the folder. db.tt 3. Download the drivers for your Tab from Acer @ support.acer.com the zip file you downloaded and run the setup.exe and follow the directions.Once all drivers have installed you are ready to move on to next step. 4. Connect your A200 to your Windows based PC. 5. Open the Acer A200 SimpleRoot folder and double click on the simple.bat (Make sure that your Tab is awake after plugging it in.) 6. Once you do this on your A200 will reboot and then you will see two icons on the screen. You use the volume rocker to make your choice and confirm. First you will use the left or volume down to select your choice and then you will use the right or volume up to confirm. You want to select the unlocked lock and then confirm. If you wait more than a couple of seconds the A200 will time out and then you will need to start over by closing the simple.bat window and then powering down and back up. After that you would start the simple.bat over 7. after selecting the unlocked lock and confirming with the volume up key return back to the simple.bat and press any key to continue. 8. Enjoy knowing the man can’t hold you down! SO there are some thanks that must be givin. first to Saurik over at github.com for the mempodroid contributions, next would have to be Roy Keene over at Rooting the Toshiba Thrive for his work on his blog. And then there are a couple …
Video Rating: 4 / 5